Inode – H3C Technologies H3C Intelligent Management Center User Manual
Page 201
187
Figure 137 Network Interface area layout
Network Interface area fields:
•
Interface Name—Identifier of a network interface card in OpenBSD. APM monitors both physical
and virtual (logical) network interface cards.
•
Receive Rate—Receive rate of a network interface card in the last APM polling period.
{
Set Threshold—Click the Set Threshold icon
to set alarm thresholds for the receive rate of
OpenBSD network interface cards. The data is highlighted in orange when the receive rate
reaches the level-1 threshold, and is highlighted in red when the receive rate reaches the level-2
threshold. Use the global thresholds or custom thresholds. For information about setting the
thresholds, see "
•
Send Rate—Send rate of a network interface card in the last APM polling period.
•
Input Error Packet Rate—Number of lost inbound error packets per second on a network interface
card in the last APM polling period.
•
Output Error Packet Rate—Number of lost outbound error packets per second on a network
interface card in the last APM polling period.
inode
inodes are required when you create a file or directory in the OpenBSD system. If inodes are used up,
you cannot create a file or directory in the file system.