H3C Technologies H3C Intelligent Management Center - Manual (Page 465)

451
2. From the navigation tree, select Application Manager > Application Monitor.
The application monitor list page appears.
3. Click the Modify icon for the SMTP application monitor you want to modify.
The page for modifying the SMTP application monitor appears.
4. Modify the following parameters for the application monitor:
{
IP Address—Cannot be modified.
{
Name—Enter a unique application monitor name. H3C recommends naming the application
monitor as Application name_host IP address.
{
Use Template—Select Enable or Disable from the list.
{
Template—Click the Configure link next to the Template field to select an existing template.
The Template field is automatically populated with the name of the selected template. For more
information about configuring application templates, see " 6 Configuration management ." This
field appears only when you select Enable from the Use Template list.
{
Description—Enter a description for the application monitor.
{
Application Monitor Port—Enter the SMTP service port. The default value is 110. This field is
available only when you select Disable from the Use Template list.
{
Traffic Collection Port—Enter one or more comma-separated SMTP service port numbers. The
default value is 110. This field appears only when at least one probe is configured for APM and
is available only when you select Disable from the Use Template list.
{
Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30. The default polling interval is 5 minutes. A shorter polling
interval provides more accurate real-time data but consumes more system resources. This field is
available only when you select Disable from the Use Template list.
{
Username/Password—Enter the username and password used to access the mailbox through
SMTP. This field is available only when you select Disable from the Use Template list.
{
Email Address—Enter a valid email address that is located on the host that provides the SMTP
service. For example, [email protected]. APM uses the email address to send and receive a test
mail. This field is available only when you select Disable from the Use Template list.
{
Contact—Enter user contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor. This field is
available only when you select Disable from the Use Template list.
{
Related Applications—Click Add next to this filed. On the Select Application dialog box that
appears, select the application that SMTP depends on.
− Enter the complete or part of the application monitor name in the Search field at the top of
the page, and click Search.
− Select the application that SMTP depends on.
− Click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology. APM automatically adds the dependencies
between SMTP and operating system applications by IP address and displays their
dependencies in the application topology.
{
Detect Application—Select this parameter if you want to enable application detection. APM
verifies the application connectivity by using the previous parameter settings, and adds the