H3C Technologies H3C Intelligent Management Center - Manual (Page 155)

141
− Edit Telnet Parameters—Select this option if you want to manually configure Telnet
parameters for APM. Make sure the Telnet settings are the same as those on FreeBSD.
− Select an Existing Template—Select this option if you want to select an existing Telnet
template for APM. For information about setting Telnet parameter templates, see H3C IMC
Base Platform Administrator Guide.
− Authentication Mode—Select the authentication mode for Telnet users. Options include
Password (No Operator or Super/Manager), Username + Password, Super/Manager
Password, Password + Super/Manager Password (No Operator), Username + Password +
Super/Manager Password, No Username + No Password, and Username + No Password.
The following parameters to be configured vary with authentication modes.
− Username—Enter the Telnet username. The user must have the FreeBSD administrator's
privilege.
− Password—Enter the password of the Telnet user.
− Super Password—Enter the super password with which a Telnet user can elevate privileges
after login.
− Timeout (1-60 seconds)—Enter the maximum time period that APM waits for a Telnet
response from FreeBSD. The value range is 1 to 60 seconds and the default is 4 seconds. If
no Telnet response is received from FreeBSD within the timeout time, APM considers that the
interaction has failed.
{
Contact—Modify the user contact information, such as name, email address, and telephone
number.
{
Related Applications—Modify the application that FreeBSD depends on. Enter the complete or
part of the application monitor name in the Search field at the top of the window, and click
Search. Select the applications that FreeBSD depends on, and then click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology.
To remove the relationship between FreeBSD and the specified application, select the
application in the Related Applications field, and then click Delete.
{
Detect Application—Select this parameter if you want to enable application detection.
Application detection enables APM to verify connection to the application by using the previous
parameter settings, and to determine whether to modify the application monitor based on the
verification result. APM modifies the application monitor only when it can connect to the
application. When this parameter is not selected, APM modifies the application monitor without
verifying the connection.
6. Click OK.
Viewing the FreeBSD application monitor report
After a FreeBSD application monitor is added, APM collects index data of the application, and
calculates its availability and health status. Obtain monitor indexes for FreeBSD by viewing the monitor
report.
To access the FreeBSD application monitor report:
1. Click the Resource tab.
2. From the navigation tree, select Application Manager > Application Monitor.
The application monitor list page displays all application monitors.