H3C Technologies H3C Intelligent Management Center - Manual (Page 709)

695
for the storage device. The new application monitor cannot inherit the history data from the previous
application monitor.
To modify a common storage device application monitor:
1. Click the Resource tab.
2. From the navigation tree, select Application Manager > Application Monitor.
The application monitor list page displays all application monitors.
3. Click the Modify icon for the common storage device application monitor you want to modify.
The page for modifying the common storage device application monitor appears.
4. Modify the following parameters:
{
IP Address—Cannot be modified.
{
Name—Enter a unique application monitor name. H3C recommends naming the application
monitor as Application name_storage device IP address.
{
Use Template—Select Enable or Disable from the list.
{
Template—Click the Configure link next to the Template field to select an existing template.
The Template field is automatically populated with the name of the selected template. For more
information about configuring application templates, see " 6 Configuration management ." This
field appears only when you select Enable from the Use Template list.
{
Description—Enter a description for the application monitor.
{
Application Monitor Port—Port used to monitor the application. The default value is 5989. This
field is available only when you select Disable from the Use Template list.
{
Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30. The default polling interval is 5 minutes. A shorter polling
interval provides more accurate real-time data but consumes more system resources. This field is
available only when you select Disable from the Use Template list.
{
Username/Password—Enter the username and password of the user who has the monitor
privilege on the storage device. The fields are available only when you select Disable from the
Use Template list.
{
SSL—Select Enable or Disable from the list. If you select Enable, APM accesses the storage
device through HTTPS. If you select Disable, APM accesses the storage device through HTTP.
{
Namespace—Enter the namespace for the SMI-S interface of the common storage device. The
default value is /root/hpq. This field is available only when you select Disable from the Use
Template list.
{
Contact—Enter the contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor. This field is
available only when you select Disable from the Use Template list.
{
Related Applications—Click Add next to this filed. On the Select Application dialog box that
appears, select the application that the storage device depends on.
− Enter the complete or part of the application monitor name in the Search field at the top of
the page, and click Search.
− Select the application that the storage device depends on.
− Click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology.