H3C Technologies H3C Intelligent Management Center - Manual (Page 311)

297
{
Password—Enter the password of the Sybase administrator.
{
Contact—Enter the contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor.
{
Related Applications—Add the application that Sybase depends on. Enter the complete or part
of the application monitor name in the Search field at the top of the window, and click Search.
Select the applications that Sybase depends on, and then click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology. APM automatically adds the dependencies
between Sybase and operating system applications by IP address and displays their
dependencies in the application topology.
{
Detect Application—Select this parameter if you want to enable application detection.
Application detection enables APM to verify connection to the application by using the previous
parameter settings, and to determine whether to add the application monitor based on the
verification result. APM adds the application monitor only when it can connect to the
application. When this parameter is not specified, APM adds the application monitor without
verifying the connection.
5. Click OK.
Modifying a Sybase application monitor
Authorized users can modify all parameters except the IP address of a Sybase application monitor.
When the IP address of a monitored Sybase host changes, operators must add a new application
monitor for the host. However, the new application monitor cannot inherit the history data from the
previous application monitor.
To modifying a Sybase application monitor:
1. Click the Resource tab.
2. Select Application Manager > Application Monitor from the navigation tree.
The page displays all application types that can be monitored by APM.
3. Click the Modify icon for the Sybase application monitor you want to modify.
The page for modifying the Sybase application monitor appears.
4. Modify the following parameters:
{
IP Address—Cannot be modified.
{
Name—Modify the unique application monitor name. H3C recommends using Application
name_host IP address for naming the application monitor.
{
Description—Modify a description for the application monitor.
{
Application Monitor Port—Modify the port number for the application monitor. The default is
TCP 5000.
{
Traffic Collection Port—Modify one or more service port numbers for Sybase. To set multiple
ports, separate the port numbers by commas. This field appears only when at least one probe
is configured for APM.
{
Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30. The default polling interval is 5 minutes. A shorter polling
interval provides more accurate real-time data but consumes more system resources.
{
Username—Modify the username of the Sybase administrator.