H3C Technologies H3C Intelligent Management Center - Manual (Page 188)

174
− Timeout (1-120 seconds)—Enter the maximum time period that APM waits for an SSH
response from OpenBSD. The value range is 1 to 120 seconds and the default is 10 seconds.
If no SSH response is received from OpenBSD within the timeout time, APM considers that
the interaction has failed.
− Retries (1-5)—Enter how many times APM retries to send SSH packets to the OpenBSD host.
Telnet parameters
− Edit Telnet Parameters—Select this option if you want to manually configure Telnet
parameters for APM. Make sure the Telnet settings are the same as those on OpenBSD.
− Select an Existing Template—Select this option if you want to select an existing Telnet
template for APM. For information about setting Telnet parameter templates, see H3C IMC
Base Platform Administrator Guide.
− Authentication Mode—Select the authentication mode for Telnet users. Options include
Password (No Operator or Super/Manager), Username + Password, Super/Manager
Password, Password + Super/Manager Password (No Operator), Username + Password +
Super/Manager Password, No Username + No Password, and Username + No Password.
The following parameters to be configured vary with authentication modes.
− Username—Enter the Telnet username. The user must have the OpenBSD administrator's
privilege.
− Password—Enter the password of the Telnet user.
− Super Password—Enter the super password with which a Telnet user can elevate privileges
after login.
− Timeout (1-60 seconds)—Enter the maximum time period that APM waits for a Telnet
response from OpenBSD. The value range is 1 to 60 seconds and the default is 4 seconds.
If no Telnet response is received from OpenBSD within the timeout time, APM considers that
the interaction has failed.
{
Contact—Enter user contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor.
{
Related Applications—Add the application that OpenBSD depends on. Enter the complete or
part of the application monitor name in the Search field at the top of the window, and click
Search. Select the applications that OpenBSD depends on, and then click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology.
{
Detect Application—Select this parameter if you want to enable application detection.
Application detection enables APM to verify connection to the application by using the previous
parameter settings, and to determine whether to add the application monitor based on the
verification result. APM adds the application monitor only when it can connect to the
application. When this parameter is not selected, APM adds the application monitor without
verifying the connection.
5. Click OK.
Modifying an OpenBSD application monitor
Authorized users can modify all parameters except the IP address of an OpenBSD application monitor.
When the IP address of a monitored OpenBSD host changes, operators must add a new application
monitor for the host. However, the new application monitor cannot inherit the history data from the
previous application monitor.