H3C Technologies H3C Intelligent Management Center - Manual (Page 439)

425
• Hub Transport role
• Unified Messaging Server role
• Edge Transport Server role
Adding an Exchange Server 2007 application monitor
APM monitors the Exchange Server 2007 application through WMI. When you add an Exchange
Server 2007 application monitor, follow these guidelines:
• Configure and enable WMI for the Windows operating system on which Exchange Server 2007 is
installed. For information about enabling WMI for Windows, see Microsoft Windows Server online
help.
• Add the Exchange Server 2007 host to be monitored to the IMC platform.
For a host managed in the IMC platform, APM obtains and displays network connections of the
host and its access device in the application topology. For more information about adding hosts to
the IMC platform, see H3C IMC Base Platform Administrator Guide.
• Obtain the correct username and password of the user who has the Windows administrator's
privileges.
• To view traffic statistics in the monitor report of the Exchange Server 2007 application, make sure
at least one probe is configured in APM. After an Exchange Server 2007 application monitor is
added, APM sends the IP address and service ports of the monitored Exchange Server 2007
application to the probes for traffic collection.
To add an Exchange Server 2007 application monitor:
1. Click the Resource tab.
2. Display the Add Application page in two ways:
{
From the navigation tree, select Application Manager > Add Application.
{
From the navigation tree, select Application Manager > Application Monitor, and click Add on
the application monitor list page.
The page displays all application types that can be monitored by APM.
3. Click Exchange 2007 of the Mail Server Monitor class.
The page for adding an Exchange Server 2007 application monitor appears.
4. Configure the following parameters for the application monitor:
{
IP Address—Enter the IP address of the host on which the Exchange Server 2007 application to
be monitored is installed. APM automatically checks the IP address and associates the
application monitor with the host if it is already managed in the IMC platform. To monitor a host
that is already managed in the IMC platform, you can also click Select and select the host in the
Select Devices window. For information about selecting a host, see " 2 Quick start ."
{
Name—Enter a unique application monitor name. H3C recommends naming the application
monitor as Application name_host IP address.
{
Use Template—Select Enable or Disable from the list.
{
Template—Click the Configure link next to the Template field to select an existing template.
The Template field is automatically populated with the name of the selected template. For more
information about configuring application templates, see " 6 Configuration management ." This
field appears only when you select Enable from the Use Template list.
{
Description—Enter a description for the application monitor.