H3C Technologies H3C Intelligent Management Center - Manual (Page 397)

383
5. Click OK.
Modifying a Jetty application monitor
You can modify all parameters except the IP address of a Jetty application monitor. When the IP address
of a monitored Jetty host changes, you must add a new application monitor for the host. The new
application monitor cannot inherit the history data from the previous application monitor.
To modify a Jetty application monitor:
1. Click the Resource tab.
2. From the navigation tree, select Application Manager > Application Monitor.
The application monitor list page displays all application monitors.
3. Click the Modify icon for the Jetty application monitor you want to modify.
The page for modifying the Jetty application monitor appears.
4. Modify the following parameters:
{
IP Address—Cannot be modified.
{
Name—Enter a unique application monitor name. H3C recommends naming the application
monitor as Application name_host IP address.
{
Use Template—Select Enable or Disable from the list.
{
Template—Click the Configure link next to the Template field to select an existing template.
The Template field is automatically populated with the name of the selected template. For more
information about configuring application templates, see " 6 Configuration management ." This
field appears only when you select Enable from the Use Template list.
{
Description—Enter a description for the application monitor.
{
Application Monitor Port—Modify the JMX port for Jetty. This field is available only when you
select Disable from the Use Template list.
{
Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30. The default polling interval is 5 minutes. A shorter polling
interval provides more accurate real-time data but consumes more system resources. This field is
available only when you select Disable from the Use Template list.
{
Username/Password—Enter the username and password of the Jetty administrator. The fields
are available only when you select Disable from the Use Template list.
{
Contact—Enter the contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor. This field is
available only when you select Disable from the Use Template list.
{
Related Applications—Click Add next to this filed. On the Select Application dialog box that
appears, select the application that Jetty depends on.
− Enter the complete or part of the application monitor name in the Search field at the top of
the page, and click Search.
− Select the application that Jetty depends on.
− Click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. You can view all dependencies of the
application in the dependency topology. APM automatically adds the dependencies between