H3C Technologies H3C Intelligent Management Center - Manual (Page 46)

32
Querying application monitors
1. Click the Resource tab.
2. Select Application Manager > Application Monitor from the navigation tree.
The application monitor list page displays all application monitors.
3. Enter the complete or part of the application monitor name in the query area, and then click the
Query icon
located to the right of the query area.
All matching application monitors are displayed. To filter application monitors by using more filter
criteria, click the Expand icon
to expand the query criteria panel.
4. Set the appropriate query criteria:
{
Name (supports fuzzy querying)
{
Application type
{
Availability
{
Health status
{
Application group
{
Host (host IP address)
{
Agent Collection
5. Click Query.
All application monitors that match the query condition are displayed in the application monitor
list. You can click an application type on the list to filter that type of monitored applications.
6. To restore the complete application monitor list, click Reset.
Adding an application monitor
APM detects most applications through auto-discovery, except file and directory applications and those
using different listening ports than most applications of the same type. To monitor undetected
applications, you can manually add application monitors for them.
To add an application monitor manually:
1. Click the Resource tab.
2. Select Application Manager > Application Monitor from the navigation tree.
The application monitor list page displays all application monitors.
3. Click Add, and then select the type of the application you want to monitor.
4. Set the parameters of the application monitor, which vary with application types.
For information about setting the application monitor parameters, see the description of adding an
application monitor for each type of applications.
5. Click OK.
Modifying an application monitor
1. Click the Resource tab.
2. Select Application Manager > Application Monitor from the navigation tree.