H3C Technologies H3C Intelligent Management Center - Manual (Page 396)

382
The Add Application page displays all application types that can be monitored by APM.
3. Click Jetty of the Application Server Monitor class.
The page for adding a Jetty application monitor appears.
4. Configure the following parameters:
{
IP Address—Enter the IP address of the host on which the Jetty application to be monitored is
installed. APM automatically checks the IP address and associates the application monitor with
the host if it is already managed in the IMC platform. To monitor a host that is already managed
in the IMC platform, you can also click Select and select the host in the Select Devices dialog
box. For information about selecting a host, see " 2 Quick start ."
{
Name—Enter a unique application monitor name. H3C recommends naming the application
monitor as Application name_host IP address.
{
Use Template—Select Enable or Disable from the list.
{
Template—Click the Configure link next to the Template field to select an existing template.
The Template field is automatically populated with the name of the selected template. For more
information about configuring application templates, see " 6 Configuration management ." This
field appears only when you select Enable from the Use Template list.
{
Description—Enter a description for the application monitor.
{
Application Monitor Port—Enter the JMX port used to monitor the application. This field is
available only when you select Disable from the Use Template list.
{
Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30. The default polling interval is 5 minutes. A shorter polling
interval provides more accurate real-time data but consumes more system resources. This field is
available only when you select Disable from the Use Template list.
{
Username/Password—Enter the username and password of the Jetty administrator. The fields
are available only when you select Disable from the Use Template list.
{
Contact—Enter the contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor. This field is
available only when you select Disable from the Use Template list.
{
Related Applications—Click Add next to this filed. On the Select Application dialog box that
appears, select the application that Jetty depends on.
− Enter the complete or part of the application monitor name in the Search field at the top of
the page, and click Search.
− Select the application that Jetty depends on.
− Click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. You can view all dependencies of the
application in the dependency topology. APM automatically adds the dependencies between
Jetty and operating system applications by IP address and displays their dependencies in the
application topology.
To remove the relationship between Jetty and the specified application, select the application
in the Related Applications field, and then click Delete.
{
Detect Application—Select this parameter if you want to enable application detection. APM
verifies the application connectivity by using the previous parameter settings, and adds the
application monitor only when it can connect to the application. If you do not select this
parameter, APM adds the application monitor without verifying the application connectivity.