H3C Technologies H3C Intelligent Management Center - Manual (Page 720)

706
Viewing the HP MSA P2000 application monitor report
The HP MSA P2000 application monitor report provides state and performance information about a
monitored HP MSA P2000 storage device.
To view the HP MSA P2000 application monitor report:
1. Click the Resource tab.
2. From the navigation tree, select Application Manager > Application Monitor.
The application monitor list page displays all application monitors.
3. Click the link naming an HP MSA P2000 application monitor.
The monitor report of HP MSA P2000 appears, as shown in
Figure 624 .
Figure 624 Part of an HP MSA P2000 application monitor report
For information about the icons in the monitor report, see " 2 Quick start ." The following information
describes the fields in each area of the monitor report.
Monitor Information
The Monitor Information area layout is shown in Figure 625 .
Figure 625 Monitor Information area layout
Monitor Information area fields:
• Name—Application monitor name.
• Health State—Health status of HP MSA P2000.
• IP Address—IP address of HP MSA P2000.
• Application Type—Type of the monitored application. It is always HP MSA P2000 for an HP MSA
P2000 application monitor.
• Port—Port used for monitoring HP MSA P2000.
• Namespace—Namespace of the SMI-S interface of HP MSA P2000.
• Last Polling Time—Time when APM last polled HP MSA P2000.