H3C Technologies H3C Intelligent Management Center - Manual (Page 170)

156
− Select an Existing Template—Select this option if you want to select an existing SSH
template for APM. For information about setting SSH parameter templates, see H3C IMC
Base Platform Administrator Guide.
− Authentication Mode—Select the authentication mode for SSH users. Options include
Password, Private Key, Password + Private Key, Password + Super Password, Private Key +
Super Password, and Password + Private Key + Super Password. The following parameters
to be configured vary with authentication modes.
− Username—Enter the SSH username. The user must have the Mac OS administrator's
privilege.
− Password—Enter the password of the SSH user.
− Private Key File—Enter the directory of the SSH private key file or browse to the file.
− Private Key Password—Enter the password to decrypt the SSH private key file.
− Super Password—Enter the super password with which an SSH user can elevate privileges
after login.
− Port—Enter the SSH port on Mac OS.
− Timeout (1-120 seconds)—Enter the maximum time period that APM waits for an SSH
response from Mac OS. The value range is 1 to 120 seconds and the default is 10 seconds.
If no SSH response is received from Mac OS within the timeout time, APM considers that the
interaction has failed.
− Retries (1-5)—Enter how many times APM retries to send SSH packets to the Mac OS host.
Telnet parameters
− Edit Telnet Parameters—Select this option if you want to manually configure Telnet
parameters for APM. Make sure the Telnet settings are the same as those on Mac OS.
− Select an Existing Template—Select this option if you want to select an existing Telnet
template for APM. For information about setting Telnet parameter templates, see H3C IMC
Base Platform Administrator Guide.
− Authentication Mode—Select the authentication mode for Telnet users. Options include
Password (No Operator or Super/Manager), Username + Password, Super/Manager
Password, Password + Super/Manager Password (No Operator), Username + Password +
Super/Manager Password, No Username + No Password, and Username + No Password.
The following parameters to be configured vary with authentication modes.
− Username—Enter the Telnet username. The user must have the Mac OS administrator's
privilege.
− Password—Enter the password of the Telnet user.
− Super Password—Enter the super password with which a Telnet user can elevate privileges
after login.
− Timeout (1-60 seconds)—Enter the maximum time period that APM waits for a Telnet
response from Mac OS. The value range is 1 to 60 seconds and the default is 4 seconds.
If no Telnet response is received from Mac OS within the timeout time, APM considers that
the interaction has failed.
SNMP parameters
− Edit SNMP Parameters—Select this option if you want to manually configure SNMP
parameters for APM. Make sure the SNMP settings are the same as those on Mac OS.