Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 175)

Module Configuration Definitions
3.5.14 Counter I/O Definitions
3-80
3
• Switching the Data Format of the Display
The I/O Data of the Counter Module can be switched among three data formats: deci-
mal, hexadecimal, and binary. Switch the data format by selecting another format from
the drop-down list.
• Decimal:
Click View (V) and then DEC (D) on the Counter I/O Definitions menu.
• Hexadecimal:
Click View (V) and then HEX (H) on the Counter I/O Definitions menu.
• Binary:
Click View (V) and then BIN (B) on the Counter I/O Definitions menu.
Setting Item Details
Channel Number
Selection Selects the channel displayed in the I/O Data Set Tab.
Status (Operating
Status Display) Displays the status of each bit in the register that contains the operat-
ing status. The corresponding box will contain a black circle when
the bit is ON and a white circle when the bit is OFF.
Operation Mode
(Operating Mode
Settings) Selects the status of each bit in the register that controls the operat-
ing mode. Click the Set Button to activate the new operating mode
settings.
Data Name (for input) Displays the name of the input data.
REG-No. (for input) Displays the register number of the corresponding input data name.
Input Data Displays the current value of the corresponding register number and
input data name.
Data Name (for output) Displays the name of the output data.
REG-No. (for output) Displays the register number of the corresponding output data name.
Output Data Displays the current value of the corresponding register number and
output data name.