Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 56)

2.1 File Manager
2-23
2
„ Switching Display between Subroutines
This function can be used in all interrupt program, function program, high-speed scan pro-
gram, startup program, and low-speed scan program folders that have been selected. File
types displayed in the List Display Section of the File Manager Window can be designated.
Select the type of subroutine to be displayed on the submenu under View (V) and then List
Display (L) on the File Manager Menu. Alternatively, right-click the subroutine and make
the selection using the pop-up menu.
„ Updating Information
When executing motion programs and DWG/function program files, display the latest tree
status by selecting View (V) and then Refresh (R) from the File Manager Menu.
„ Copying Motion Programs
The procedure to copy motion programs is given below.
1. Select the motion program file to be copied with the cursor.
2. Click Copy DWG (C) on the pop-up menu. Alternatively, right-click the file and make
the selection using the pop-up menu.
3. Input the name of the copy destination motion program and click the OK Button.
4. A new program will be created at the copy destination.
Existing motion programs cannot be copied to or overwritten.
2.1.10 Transferring Files
This function reads and writes data between the Engineering Tool and the MP900-series
Motion Controllers using the CP-717.
„ Outline of File Transfers
All data in the PLC folder can be transferred at one time, or individual files can be desig-
INFO