Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 434)

7.4 Creating Table Programs
7-67
7
„ Setting C Constant Tables
C registers are created by inputting constants (integer, double-length integer, real number,
and hexadecimal constants), symbols, and C register numbers. When C registers are saved,
the constants are automatically converted to C registers after the upper and lower limits of
each constant are checked.
Table data can be created for as many C registers as are currently open.
View (V)
Tool Bar (T) Displays the Tool Bar.
Status Bar (S) Displays the Status Bar.
Display Head Row (F) Moves the cursor to the first row of the table.
Display Designated
Row (R) Moves the cursor to a specific row in the table.
Display Last Row (E) Moves the cursor to the last row of the table.
Window (W)
Cascade (C) Stacks windows in the display.
Tile (T) Lines up windows in the display.
Arrange Icons (A) Lines up icons.
Help (H)
About Application (A) Displays version information for the CP-717.
Setting Item Details
Data Name Enter a data name for each constant of up to 48 characters.
Symbol Enter a symbol of up to 8 characters to be used for the destination C
register.
SET VAL Enter the constant to be saved to the C register. When inputting in
hexadecimal, add an "H" to the beginning of the value, such as
H00FF.
When inputting settings, input values within the range outlined in the
Lower Limit and Upper Limit columns. The settings will be checked
against these limits.
Unit Enter a unit for the constant of up to 8 characters.
Menu Command Function
No.
1
2
・
・
・
Data Name Symbol SET VAL Unit
Lower
Limit
Upper
Limit
Save Point
C register definition area
Table name Leading Register No Input Mode