Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 225)

Module Configuration Definitions
3.6.8 MP930 Motion Parameter Definitions
3-130
3
„ SERVOPACK Parameters Tab Page
This tab page is used to set the servo parameters.
1 Refer to MP930 Machine Controller User's Manual: Design and Maintenance (SIEZ-C887-1.1) for
details on servo parameter settings.
2 Displaying Current Values
The current values will not be displayed if a SERVOPACK alarm exists even when the SERVOPACK
Tab is clicked. First clear the alarm, and then try again to display the current values.
Setting Item Details
Group Name Select one of the group names that was set in the group definitions.
Logical Axis Name Select a logical axis name. Set servo parameters for each axis.
SERVOPACK Name Displays the SERVOPACK type.
Parameter Name Displays the parameter name.
Input Data (Set Data) Input the setting for the parameter.
Unit Displays the unit for setting the parameter.
Current Value Displays the current value saved in the SERVOPACK.
INFO