Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 191)

Module Configuration Definitions
3.5.18 PO-01 Motion Parameters Settings
3-96
3
Refer to MP920 Machine Controller User's Manual: Motion Module (SIEZ-C887-2.5) for details on
setting parameter settings.
Motion Monitor Tab Page
The Motion Monitor Tab Page displays the current values of the motion parameters. The
parameters are only displayed in the Motion Monitor Tab Page; the settings cannot be
changed here.
Setting Item Details
Axis Number Select the desired axis number (axis 1 to axis 4). The parameters for
each axis are displayed.
No. Displays the parameter number of the setting parameter.
Parameter Name Displays the parameter name.
REG-No. Displays the number of the register that corresponds to the parameter
name.
The range of registers depends on the motion number and axis num-
ber currently being displayed.
Input Data (Set Data) Input (or select) the parameter value in this column.
Unit Displays the units of the corresponding parameter.
Current Value In online mode, the parameter's current value will be displayed. In
offline mode, nothing will be displayed.
INFO