Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 239)

Module Configuration Definitions
3.7.8 SVA Parameter Settings
3-144
3
Tab Pages
The SVA Motion Parameters Window is composed of four tab pages: Fixed Parameters,
Setup Parameters, SERVOPACK, and Monitor.
When the SVA Motion Parameters Window is opened without any settings having been made previ-
ously, a "New File" Message Box will be displayed. Click the OK Button to proceed to the next opera-
tion.
SVA Motion Parameters Window Original Menus
Refer to SVB Motion Parameters Window Original Menus under 3.5.19 SVB Motion
Parameters Settings for details.
„ Setting SVA Motion Parameters
Fixed Parameters Tab Page
This tab page is used to set the motion fixed parameters required for servo adjustment. Refer
Tab Page Function
Fixed Parameters Sets the basic motion fixed parameters.
Set Up Parameters Sets the motion setting parameters in registers.
SERVOPACK Sets the servo parameters of the SGDH.
Monitor Sets the parameters to monitor.
INFO