Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 70)

2.1 File Manager
2-37
2
Changing the Transfer CPU
The communications information and the transfer CPU can be changed. For details, refer to
" All File Transfer Window. "
Click File (F) and then Change CPU (C) on the pull-down menu.
Starting a Transfer
The procedure to start file transfer between the Machine Controller and the flash memory is
given below.
1. Click File (F) and then Execute (S).
2. Click the Yes Button in the message box that is displayed.
3. Click the Yes Button in the message box that is displayed when the transfer has been
completed.
To compare flash memory, stop Machine Controller operation and start the comparison immediately
after saving the flash memory. Comparison errors may be generated for the D register if the compari-
son is executed while the Machine Controller is operating.
„ Closing the File Transfer Window
The procedure to close the File Comparison Window is given below.
1. Click File (F) and then Exit (E) on the File Transfer Menu.
2. The File Transfer Window will be closed.
Log on again to the CPU when files that may change the User Management file are transferred.
2.1.11 Configuration
The Configuration Window is used to set the CP-717 system environment.
„ Opening the Configuration Window
Select View (V) and then Configuration (C) from the menu bar.
INFO
INFO