Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 241)

Module Configuration Definitions
3.7.8 SVA Parameter Settings
3-146
3
Refer to MP930 Machine Controller User ' s Manual: Design and Maintenance (SIEZ-C887-1.1) for
details on servo parameter settings.
SERVOPACK Parameters Tab Page
Click the SERVOPACK Tab.
Refer to 6.4 Parameters for SGDH SERVOPACK in the MP940 Machine Controller User's
Manual: Design and Maintenance (SIEZ-C887-4.1) for details on servo parameter settings.
„ Motion Monitor Tab Page
Click the Monitor Tab. The settings cannot be changed in this window.
Setting Item Details
Axis Number Displays the axis number. The axis is fixed at Axis 1.
No. Displays the number of the servo parameter.
Parameter Name Displays the parameter name.
Input Data (Set Data) Input (or select) the value for the parameter. Refer to the list of
motion SERVOPACK parameters for details.
Unit Displays the unit for setting the data.
Current Value In online mode, the parameter's current value will be displayed. In
offline mode, nothing will be displayed.
INFO