Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 420)

7.4 Creating Table Programs
7-53
7
• 7.4.7 Inputting I/O Conversion Table Data
• 7.4.8 Inputting Interlock Table Data
• 7.4.9 Inputting Component Assembly Table Data
• 7.4.10 Inputting Data in C Constant Tables
1 C constant tables cannot be opened from the File Manager. Select File (F), Open (O), and then C Reg-
ister (C) from the Engineering Manager windows.
2 The Open DWG Setting Window will be opened if a Table Program Window is opened when no draw-
ing or function program is open. Enter the drawing name and type, and click the OK Button.
3 The table program is set for the drawing or function ladder logic program from which it was opened.
Therefore, if different drawing number or function symbol table programs are to be set, the ladder
logic program for that drawing number or function symbol must be opened.
7.4.3 Table Program Window Menus
The following table shows the functions of menu commands in Table Program Window.
INFO
Menu Command Function
File (F)
File Manager (F) Opens the File Manager.
Open (O) Opens each function windows.
Close (C) Closes Table Program Windows.
Register User Menu
(S) Registers shortcuts for Table Program Windows.
Save (S) Saves table programs.
Delete (D) The delete function cannot be used with Table
Program Windows.
Page Setting (M) Sets print margins.
Print Table (P) Prints table programs.
Exit (X) Exits the Engineering Manager.
Edit (E)
Cut (T) Cuts table data.
Copy (C) Copies table data to the clipboard.
Paste (P) Copies the contents of the clipboard.
Delete Row (D) Deletes multiple consecutive rows.
Insert Row (I) Inserts a row.
Input (I)
Input Setting Data (S) Switches to settings input mode.
Input Table Definition
(T) Switches to table definition input mode.
Input Register (R) Switches to register input mode.
Direction of Cursor
Movement (C) Sets the direction for cursor movement.