Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 75)

Manager Functions
2.2.2 Basic Functions
2-42
2
The following screens are displayed when the Motion Editor is opened from the File Man-
ager.
1. Start the Motion Editor from the File Manager.
2. Click Motion Editor (E) from the File Menu, as shown in the above screen, or double
click the MPM001 file to open the Engineering Manager (large window) and the
Motion Editor (small window) as shown below.
3. If the Motion Editor is closed at this stage, only the Engineering Manager Window will
be displayed.
The Engineering Manager Window
2.2.2 Basic Functions
All of the functions called using the Engineering Manager can be selected by clicking File
(F) and then Open (O).
Selection