Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 348)

Monitoring Tools
6.2.1 Register Lists
6-4
6
6.2 Using the Ladder Programming Tool
This section describes the Register List and Tuning Panel, which are often used as Motion Mon-
itoring Tools from the Ladder Programming Tool.
6.2.1 Register Lists
The current values of the Machine Controller's internal registers, the S, I, O, M, D, and C
registers, can be displayed in real time on a register list. These register values are not just for
reference only, but can also be changed.
A separate Register List Window is opened for each set of register display parameters, so
more than one window can be opened at the same time. When the Open Register (O) com-
mand is executed, a window to display the contents of the registers will be opened as a child
window.
Refer to 7.2.7 # Register Lists for register list operations.
6.2.2 Tuning Panel
The Tuning Panel is used to define comments for names, units, and other items for registers
used in drawing and function programs. In Online Mode, the current values of defined regis-
ters are displayed and can be changed.
„ Tuning Panel Window
Definitions data is input on the Tuning Panel. Up to 100 definitions can be created.
PT#: CPU#
PT#: CPU#
Parent window
Register List Window
Menu Bar
Register Window
Register Window
Child windows