Installation procedure, Assembling and preparing, Unpacking – LG 84UB980V User Manual

Page 69

Advertising
background image

13

ENG

EN

G

LIS

H

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you are using.

y

New features may be added to this TV in the future.

y

The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be

turned off if it will not be watched for some time, as this will reduce energy consumption.

y

The energy consumed during use can be significantly reduced if the level of brightness of the picture is

reduced, and this will reduce the overall running cost.

NoTE

INSTALLATIoN PRocEdURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

* If the TV is turned on for the first timer after it was shipped from the factory, initialization of the TV may take a few

minutes.

ASSEMBLING ANd PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where

you purchased your product. The illustrations in this manual may differ from the actual product and item.

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

Some models have a thin film attached on to the screen and this must not be removed.

cAUTIoN

y

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to upgrade of

product functions.

y

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18

mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit

into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

NoTE

Advertising
This manual is related to the following products: