3 before switching on, Before switching on – Festo Контроллеры двигателя SFC-LAC User Manual
Page 108
Advertising
![background image](/manuals/464473/108/background.png)
5. Commissioning
5−6
Festo GDCP−SFC−LACI−CO−EN en 0812NH
5.1.3
Before switching on
When the SFC−LACI is switched on, the controller interface is
activated as standard [HMI = off ].
Caution
Unexpected movements of the drive due to incorrect
parameterising
·
Make sure that there is no active ENABLE signal when
switching on the SFC−LACI on the controller interface.
·
Parameterise the entire system completely before actiĆ
vating the controller with ENABLE or [HMI = on].
Advertising