Festo Контроллеры двигателя SFC-LAC - Manual (Page 208)

6. Diagnostics and error display
6−8
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Warnings Warnings have no influence on the behaviour of the drive.
The cause of the warning should be eliminated in order that it
does not lead to a fault.
If a warning occurs, the fault LED will flash and the SCON.B2
WARN output will be set (FHPP status bits, see 5.5.2).
Warning Cause PNU 215 Fault
no.
*)
INDEX PULSE
WARNING During homing: The homing switch signal lies too close
to the index pulse. In some cases Ăthis can mean that no
reproducible reference position can be determined.
· See section 6.7.
0x0001 84
WARNING
MOTOR COLD Temperature of the linear motor <Ă−10 °C. Increase
ambient temperature if necessary. 0x0002 108
WARNING
MOTOR HOT Temperature of the linear motor 70...75 °C, check for
possible overloading of the drive; check the mechanical
system, e.g. for sluggishness; reduce ambient
temperature. 0x0004 109
WARNING
SFC−LACI COLD Temperature <āāĂ−10 0x0008 74
WARNING
SFC−LACI HOT Temperature 80...85 °C 0x0010 75
STANDSTILL
WARNING The axis has moved outside the standstill tolerance
window. 0x0020 36
ILLEGAL
RECORD
WARNING Non−permitted record number. 0x0040 3
*) Fault number in the diagnostic memory, see section 6.4.