Festo Контроллеры двигателя SFC-LAC - Manual (Page 223)

A. Technical appendix
A−3
Festo GDCP−SFC−LACI−CO−EN en 0812NH
A.1 Technical data
General
Protection class of the entire system according
to ENĂ60529 IP54 (plug connector inserted or fitted with
protective cap)
Relative air humidity (at 25 °C) 0 ... 95%, non−condensing
Temperature range Operation: 0 ... +40Ă°C
Storage / Transport −20 ... +60Ă°C
SFC−LACI temperature monitoring Warning message at temperature > āā80 °C
Shutdown at temperature >āā 85 °C (restart only
when temperature falls below 80 °C)
Electromagnetic compatibility (EMC) 1)
(interference immunity and interference
emission)
See declaration of conformity (www.festo.com)
Vibration As per DIN ENĂ60068, part 2−6:
0.15Ămm travel at 10 ... 58 Hz
2Ăg acceleration at 60 ... 150ĂHz
Shock As per DIN ENĂ60068, part 2−27:
±15Ăg at 11Ăms duration
5 shocks per direction
Assembly Wall or H−rail mounting
Dimensions Approx. 247 x 120 x 66 mm (without plug)
Weight Approx. 1500 g
1) The component is solely intended for use in industrial environments.
Electrical data
Load voltage supply
Ĉ Nominal voltage
Ĉ Nominal current (max. continuous motor
current)
Ĉ Peak current
Power connection, pins A1, A2
48 VDC (+5/−10%) (Load power down:
Ţ 36 V)
10 A
20 A
Logic voltage supply
Ĉ Nominal voltage
Ĉ Peak current Power connection, pins 1, 2
24 VDC ± 10%
3.8 A (when using the local digital outputs,
see section 3.2).