Festo Контроллеры двигателя SFC-LAC - Manual (Page 267)

B. Parametrising as per FHPP−FPC
B−39
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Diagnostic memory parameters
PNU 204 1...4 uint8 r(w)
Description Configuration of the diagnostic memory.
Fault type 204 1 rw
1 (0x01): Record incoming and outgoing *) faults (default)
2 (0x02) Log only incoming faults
*) Outgoing fault = Acknowledge the fault.
Resolution 204 2 rw
1 (0x01): Resolution time stamp 10 ms (default)
2 (0x02): Resolution time stamp 1 ms
Clear memory
(delete memory)
204 3 rw
(delete memory)
Clear diagnostic memory by writing value = 1.
Read will always reply with value = 1.
Number of entries 204 4 r
Number of entries in the diagnostic memory
CI / DS402 20CCh 01h...04h uint8 rw/r