Festo Контроллеры двигателя SFC-LAC - Manual (Page 237)

B. Parametrising as per FHPP−FPC
B−9
Festo GDCP−SFC−LACI−CO−EN en 0812NH
B.2 Parameterisation via FPC
The Festo Parameter Channel" is used for transferring
parameters in the PDO2 with the data profile FHPP
(see section 5.4.5).
Alternatively, the parameterisation can take place via SDOs
(for converting the parameter numbers, see section 5.4.4).