Festo Контроллеры двигателя SFC-LAC - Manual (Page 358)

C. Object directory DS402 and CI
C−32
Festo GDCP−SFC−LACI−CO−EN en 0812NH
CI checksum active (CI checksum required)
CI 20F3h 00h Var uint8 rw
Description When checksum checking is activated, the CI commands to the SFC−LAC must
be provided with a checksum (see Tab. C/2). The checksum is calculated as per
Tab. C/5.
Example: Deactivate checksum: =20F300:0012" (12 = checksum).
The CI terminal integrated into the FCT automatically uses checksums.
Values: 0x00: deactivated (default); 0x01: activated
FCT password
CI 20FAh 01h, 02h Array V−string rw/w
Description Managing the passwords
FCT password 01h rw
Password for the FCT software
Value:
<........> (fixed 8 characters, ASCII, 7−bit)
Default: <00000000> (status upon delivery and after reset)
Super password 02h w
Entering the super password.
Resets all passwords (FCT password and HMI password, object 20FB).
Contact Festo Service if you require the super password.
Local password (HMI password)
CI 20FBh 00h Var V−string rw
Description Managing the (local) HMI password to enable certain functions executed via
the control panel.
Value:
<........> (fixed 8 characters, ASCII, 7−bit)
Only the first 3 characters are evaluated.
Default: < 00000000> (status upon delivery and after reset)