Festo Контроллеры двигателя SFC-LAC - Manual (Page 240)

B. Parametrising as per FHPP−FPC
B−12
Festo GDCP−SFC−LACI−CO−EN en 0812NH
B.2.2 Task identifiers, response identifiers and error numbers
Task identifiers:
ReqID Description Response identifier
Positive Negative
0 No job 0 ć
1 Request parameter 1) 1, 2 7
2 Modify parameter value (word) 1) 1 7
3 Modify parameter value (double word) 1) 2 7
6 Request parameter (array) 4, 5 7
7 Modify parameter value (array, word) 4 7
8 Modify parameter value (array, double word) 5 7
11 Modify parameter value (byte) 1) 11 7
12 Modify parameter value (array, byte) 12 7
1) When using task numbers for simple variables to access parameters implemented as an array,
the subindex is ignored or set to 0. ĂThis means that the first element of an array is always
addressed.
2) Jobs with non−supported job numbers (ReqID) will be answered with Response identifier 7 and
error number 22.
Tab. B/3: Task identifiers