Festo Контроллеры двигателя SFC-LAC - Manual (Page 355)

C. Object directory DS402 and CI
C−29
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Version FCT plug−in min.
CI 2067h 00h Var V−string r
Description Minimum FCT version required.
Format = xx.yy" (xx = main version, yy = secondary version).
Version FCT plug−in opt.
CI 2068h 00h Var V−string r
Description Optimum FCT version.
Format = xx.yy" (xx = main version, yy = secondary version).
HMI scaling (control panel settings)
DS402 / CI 20D0h 01h, 02h Array uint8 r
Description Units of measurement and decimal places on the control panel.
See CI object 20FFh / PNU 126.
Measuring unit 01h
Definition of unit of measurement.
The setting for the system of measurement only affects the display. All par−
ameters are converted to the given unit of measurement only during writing
or reading.
Note: The SFC−LAC operates internally with metric units; the CI interface with
increments.
Values: fixed = 1 (0x01): millimetres,
e.g. mm, mm/s, mm/s 2
Scaling size 02h
Number of places after the decimal point. Fixed = 2.