Festo Контроллеры двигателя SFC-LAC - Manual (Page 68)

3. Installation
3−16
Festo GDCP−SFC−LACI−CO−EN en 0812NH
3.6 Controller interface
Communication with the higher−order controller (PLC/IPC)
occurs via the controller interface.
There is a 9−pin Sub−D plug on the SFC−LACI for connecting
the fieldbus. This connection is used for the incoming and
continuing fieldbus cables.
Note
Only fieldbus plugs of type FBS−SUB−9−BU−2x5−POL−B and
FBA−2−M12−5−POL from Festo ensure conformance to IP 54.
Note the instructions in section 3.7.5 if other sub−D plugs
are used.