Festo Контроллеры двигателя SFC-LAC - Manual (Page 263)

B. Parametrising as per FHPP−FPC
B−35
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Data memory control
PNU 127 1...3 uint8 w
Description Commands for EEPROM
Delete EEPROM 127 1
Fixed: 16 (0x10): Delete data in EEPROM.
Once the object has been written, and after power off/on, the data in the
EEPROM are reset to the factory settings.
Save data 127 2
The data in EEPROM will be overwritten with the current user−specific settings.
Fix 1 (0x01): Save data.
Reset device 127 3
0x10: Reset device (EEPROM is not erased, state is identical to that after
switching off/on).
CI / DS402 20F1h 01h...03h uint8 w
Note
All user−specific settings will be lost on deletion (except for
cycle number). The status after deletion corresponds to
the standard factory setting.
· Always carry out a first commissioning after deleting
the EEPROM.
· When the EEPROM is deleted, the fieldbus address is
also reset.