Festo Контроллеры двигателя SFC-LAC - Manual (Page 16)

Contents and general safety instructions
XIV
Festo GDCP−SFC−LACI−CO−EN en 0812NH
SFC−LACI motor controller manual
This manual contains basic general information on operating,
mounting, installing and commissioning the positioning sysĆ
tems with the motor controller SFC−LACI−...−CO. It also conĆ
tains information on the functions of the CANopen interface
as well as information on commissioning with the Festo ConĆ
figuration Tool (FCT) software package.
Information on additional components can be found in the
operating instructions supplied with the product.
Type Designation Contents
Brief overview +
descriptions on CD ROM ć Brief overview: Important initial
information and documentation
overview.
CD: Includes descriptions as listed
below.
Description Motor controller SFC−LACI
GDCP−SFC−LACI−CO−... Installation, commissioning and diagĆ
nosis of positioning systems with the
SFC−LACI with communication via
CANopen.
Help system for software Festo Configuration Tool
help (contained in FCT
software) Functional descriptions for the Festo
Configuration Tool configuration softĆ
ware.
Further descriptions as per
control interface Variants
GDCP−SFC−LACI−IO−...
GDCP−SFC−LACI−PB−...
GDCP−SFC−LACI−DN−... Installation, commissioning and diagĆ
nosis of electric drives with the SFC−LACI
with communication via a different conĆ
trol interface.
Operating instructions Drives
DFME−...−LAS
DNCE−...−LAS Installing and commissioning the drive.