Festo Контроллеры двигателя SFC-LAC - Manual (Page 266)

B. Parametrising as per FHPP−FPC
B−38
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Fault number
PNU 201 1...16
d
uint16 r
Description Fault number saved in the diagnostic memory, serves for identifying the fault.
Fault numbers with descriptions: see section 6.3.
Event ... 201 ...
see PNU 200.
CI / DS402 20C9h 01h...10h uint16 r
Time stamp
PNU 202 1...16
d
uint32 r
Description Time point of the diagnostic event since device was switched on, in the time
unit as per PNU 204/2.
Event ... 202 ...
see PNU 200.
CI / DS402 20CAh 01h...10h uint32 r
Additional information
PNU 203 1...16
d
0...15 uint32 r
Description Number of movement cycles at the time a fault comes or goes. See PNU 305.
Event ... 202 ... ...
see PNU 200.
CI 20CBh 01h...10h uint32 r