Festo Контроллеры двигателя SFC-LAC - Manual (Page 280)

B. Parametrising as per FHPP−FPC
B−52
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Record control byte 2
PNU 402 1...32
d
Array uint8 rw
Description For record selection: Step enabling condition for chained records
(see section 5.6.5).
Values:
Bit 0:
= 0 No record chaining
= 1 Record chaining
Bit7: = 0 Record chaining is not locked out;
= 1 Record chaining is locked out
Record 0
(positioning
402 1
(positioning
record 0) Do not use (Homing)
Record 1
(positioning
402 2
(positioning
record 1) Record control byte 2 Positioning record 1
Record ...
(positioning
402 ...
(positioning
record ...) Record control byte 2 Positioning record 2 ... 30
Record 31
(positioning
402 32
(positioning
record 31) Record control byte 2 Positioning record 31
CI 20EBh 01h ... 20h uint8 rw
Note: Not used with DS402.