Festo Контроллеры двигателя SFC-LAC User Manual
Page 56
3. Installation
3−4
Festo GDCP−SFC−LACI−CO−EN en 0812NH
1
Parametrising
interface (RS232)
2
Controller interface
3
Power supply
4
Earth terminal
5
Local digital I/Os
6
Motor connection
(e.g. DNCE−...−LAS)
1
2
3
4
5
6
Fig. 3/1:
Connections to the SFC−LACI
Connection on the SFC−LACI−CO
Description
1
Parameterising
interface
M8 socket, 4−pin
RS232 interface for parameterising, commissioning and
diagnosis via FCT.
} Section 3.5
2
Controller
interface
Sub−D plug, 9−pin
Interface for connecting to a PLC controller.
} Section 3.6
3
Power supply
Sub−D plug, 7W2
Voltage connection with 2 high−current contacts and
5 low−current contacts (separate load and logic voltage
supply).
} Section 3.2
4
Earth terminal
Stud bolt, M4
Functional earth connection
} Section 3.3
5
Local digital
I/Os
M8 socket, 3−pin
Local digital inputs and outputs
} Section 3.9
6
Motor
connection
Plug connector, type
ITT Cm3
Power supply for linear motor and sensor signals
} Section 3.4
Tab. 3/1: Overview of connections