Festo Контроллеры двигателя SFC-LAC User Manual
Page 150
Advertising
![background image](/manuals/464473/150/background.png)
5. Commissioning
5−48
Festo GDCP−SFC−LACI−CO−EN en 0812NH
5.5.7
Examples of control and status bytes (FHPP standard)
On the following pages you will find typical examples of
control and status bytes as per FHPP standard:
1. Creating readiness to operate Ĉ Record selection
2. Creating readiness to operate − Direct mode
3. Fault handling
4. Homing
5. Positioning using record selection
6. Direct mode: Positioning mode
7. Direct mode: Force mode
A description of the finite state machine for SFC−LACI can be
found in section B.1.
Advertising