Festo Контроллеры двигателя SFC-LAC - Manual (Page 333)

C. Object directory DS402 and CI
C−7
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Condition for status
transfer Description
16 Quick stop active"
−> Operation enable"
Fault reset = 0, Enable operation = 1, Quick stop = 1, Enable voltage
= 1, Switch on = 1.
Transfer defined via Quick stop option code" 605Ah.
No serious error.
19 Fault"
−> Switched on"
Fault reset = positive edge, Enable operation = 1, Quick stop = 1,
Enable voltage = 1, Switch on = 1.
Note: This transition is not included in the DS402 profile. However, it
is required for drives with non−self−locking shut−off characteristics,
so as to avoid uncontrolled movement under load when the drive is
switched off.
Tab. C/10: Description of the transfer conditions