Yaskawa iQpump1000 AC Drive Quick Start User Manual

Page 41

Advertising
background image

Table 2.2 HOA Keypad Installation Methods and Required Tools

Installation

Method

Description

Installation

Support Sets

Model

Required Tools

External/

Face-Mount

Simplified installation with the

HOA keypad is mounted on the

outside of the panel with two

screws.

Phillips screwdriver

(#1)

Internal/

Flush-Mount

Encloses the HOA keypad in

the panel. The front of the HOA

keypad is flush with the outside

of the panel.

Installation Support Set A

(for mounting with screws

through holes in the panel)

EZZ020642A

Phillips screwdriver

(#1, #2)

Installation Support Set B

(for use with threaded studs

that are fixed to the panel)

EZZ020642B

Phillips screwdriver (#1)

Wrench (7 mm)

NOTICE: Prevent foreign matter such as metal shavings or wire clippings from falling into the drive during installation and project

construction. Failure to comply could result in damage to the drive. Place a temporary cover over the top of the drive during installation.

Remove the temporary cover before drive start-up, as the cover will reduce ventilation and cause the drive to overheat.

External/Face-Mount

1.

Cut an opening in the enclosure panel for the HOA keypad as shown in

Figure 2.11

.

2.

Position the HOA keypad so the display faces outwards, and mount it to the enclosure panel as shown in

Figure

2.12

.

22 (0.87)

14 (0.56)

26 (1.02)

78 (3.1)

2 (0.08)

Unit: mm (in)

22 (0.87)

22 (0.87)

Figure 2.11 Panel Cut-Out Dimensions (External/Face-Mount Installation)

HOA Keypad

M3 x 6
Phillips recessed
pan head machine screw x 2

Enclosure panel

Figure 2.12 External/Face-Mount Installation

Internal/Flush-Mount

An internal/flush-mount requires an installation support set that must be purchased separately. Contact Yaskawa to order an

installation support set and mounting hardware.

Figure 2.13

illustrates how to attach the Installation Support Set A.

1.

Cut an opening in the enclosure panel for the HOA keypad as shown in

Figure 2.14

.

2.

Mount the HOA keypad to the installation support.

3.

Mount the installation support set and HOA keypad to the enclosure panel.

2.1 Mechanical Installation

YASKAWA TOEP YAIP1W 01B YASKAWA AC Drive - iQpump1000 Quick Start Guide

41

2

Mechanical Installation

Advertising