Basler Electric BE1-11m - Manual (Page 49)

9424200996 Rev L 37
Operational Settings
Phase undervoltage element operational settings are configured on the Undervoltage (27P) settings
screen (Figure 33) in BESTCOMSPlus. Setting ranges and defaults are summarized in Table 8.
Figure 33. Phase Undervoltage Settings Screen
Table 8. Operational Settings
Setting Range Increment Unit of Measure Default
Mode
Disabled,
One of Three,
Two of Three,
or Three of Three
n/a n/a Disabled
Pickup 0 or 1 to 300 0.1 volts 0
Inhibit Level 0 or 1 to 300 0.1 volts 0
Timing Mode Definite or Inverse n/a n/a Definite
Time Delay (Definite Timing) 50 to 600,000 varies milliseconds 50
Time Dial (Inverse Timing) 0 to 9.9 0.1 units 0
BE1-11m Phase Undervoltage (27P) Protection