A.1 technical specifications – Festo Электромотор MTR-DCI User Manual
Page 203
A. Technical appendix
A-3
Festo P.BE-MTR-DCI-CO-EN en 1209a
A.1
Technical specifications
General information
Protection class as per EN 60529
IP54 (plug connector inserted or fitted with protec-
tive cap)
Relative humidity
0 to 95 %, non-condensing
Temperature range
operation: 0 ... +50 °C
storage/transport: -25 ... +60 °C
Vibration
As per DIN/IEC 68/EN 60068 part 2-6,
Severity level 1
Shock
As per DIN/IEC 68/EN 60068 part 2-27,
Severity level 1
Protection against electric shock
1)
Protection against direct and indirect contact as per
IEC/DIN EN 60204-1 by PELV circuits (Pro-
tected Extra-Low Voltage)
Electromagnetic compatibility (EMC)
2)
see conformity declaration (www.festo.com)
Gear type
Planetary gear
Encoder (with 4-fold evaluation)
MTR-DCI-32: 300 x 4 —> 1200 Inc/revolution
MTR-DCI-42,52,62: 500 x 4 —> 2000 Inc/revolution
Temperature monitoring
Warning message at 70 °C < T < 80 °C
Shut-down at temperature ≥ 80 °C
Display resolution
128 x 64 pixels
1)
The device is intended for industrial use.
2)
The maximum permitted I/O signal cable length is 30 m.