Festo Электромотор MTR-DCI - Manual (Page 89)

4. Control panel (only type MTR-DCI-...-H2)
4-17
Festo P.BE-MTR-DCI-CO-EN en 1209a
4.5.1 [Settings] [Axis type]
Select the axis driven by the MTR-DCI
[Axis type] Description
[Type DMES-...] Festo servo axis
[Type DNCE-...] Festo electrocylinder
[Rotation drive] Specific rotation axis
[User config] Specific linear axis
Tab. 4/6: Menü [Settings] [Axis type]
<- -> With the arrow keys you can set the axis-specific
features e.g. feed constant, measuring system or
counting direction according to the entry request.
(details see chapter 5.2.1).
SAVE You can save the settings permanently in EEPROM
with the <Enter> button
ESC With the <Menu> button you can interrupt the
activity and return to the higher-order menu.
• Save the settings with SAVE <Enter>.