Festo Электромотор MTR-DCI - Manual (Page 94)

Enter Password:
[?xx] =
ESC<Menu>
EDIT <--> OK <Enter>
Enter Password:
[?xx] =
ESC<Menu>
EDIT <--> OK <Enter>
New Password:
[?xx] =
ESC<Menu>
EDIT <--> OK <Enter>
4. Control panel (only type MTR-DCI-...-H2)
4-22
Festo P.BE-MTR-DCI-CO-EN en 1209a
Enter password
As soon as a password is active, it will be scanned automati-
cally when the menu commands [Positioning], [Settings] or
[HMI control] are accessed.
The current entry position is marked with a question mark.
1. Use the arrow buttons to select a figure 0...9.
2. Confirm your entry with <Enter>. The next entry position
will be displayed.
3. Repeat the entry for the remaining entry positions.
When the correct password is entered, all parameterising and
control functions of the control panel are enabled until the
power supply is switched off.
Modify/deactivate password
Select the menu [Settings] [Password edit].
Enter the previous password with 3 figures 0...9. The current
entry position is marked with a question mark.
1. Set the first figure of the previous password with the
arrow buttons.
2. Confirm the figure with OK <Enter>.
3. Set the figure for the next entry position “?”.
After selecting the 3rd. figure of the previous password,
you can modify or deactivate the password.
Enter the new password with 3 figures or “000” in order
to deactivate the old password:
4. Use the arrow buttons to select the first figure.