Festo Электромотор MTR-DCI - Manual (Page 77)

4. Control panel (only type MTR-DCI-...-H2)
4-5
Festo P.BE-MTR-DCI-CO-EN en 1209a
Function Button
MENU Activates the main menu from the status display.
Menu
ESC Rejects the current entry and switches back in stages to the higher-order
menu level or status display.
EMERG.STOP interrupts the current positioning procedure ( > Error mode; confirm
with <Enter>, then automatic return to the status display)
Only when HMI = on
OK Confirms the current selection or entry.
Enter
SAVE Saves parameter settings permanently in the EEPROM.
START/STOP Starts or stops a positioning procedure (only in Demo mode).
After stop: Display of current position; use <Menu> to return to the
higher-order menu level.
<- -> Scrolls within a menu level in order to select a menu command.
v
V
EDIT Sets parameters.
Tab. 4/1: Button function (overview)