Festo Электромотор MTR-DCI User Manual
Page 225
B. Reference – Festo Handling and Positioning Profile (FHPP)
B-7
Festo P.BE-MTR-DCI-CO-EN en 1209a
Fault numbers
Description
0
0x00
Non-permitted PNU The parameter does not exist.
1
0x01
Parameter value cannot be modified (read only)
(2)
0x02
– (reserved - Lower or upper limit value exceeded)
1)
3
0x03
Faulty subindex
4
0x04
No array
5
0x05
Incorrect data type
(6)
0x06
– (reserved - Setting not permitted – can only be reset)
1)
(7)
0x07
– (reserved - Describing element cannot be modified)
1)
(8)
0x08
– (reserved - PPO-Write requested in IR does not exist)
1)
9
0x09
Description data do not exist
(10)
0x10
– (reserved - Access group incorrect)
1)
11
0x0A
No higher-order
(12)
0x0B
– (reserved - Password incorrect)
1)
13
0x0C
Text not legible in cyclic exchange
(14)
0x0D
– (reserved - Name not legible in cyclic exchange)
1)
(15)
0x0E
– (reserved - Text array does not exist)
1)
(16)
0x10
– (reserved - PPO-Write missing)
1)
(17)
0x11
– (reserved - Order cannot be processed because of operating status)
1)
(18)
0x12
– (reserved - Other faults)
1)
(19)
0x13
– (reserved - Date not legible in cyclic exchange)
1)
(20)
0x14
– (reserved - Non-permitted value)
1)
(21)
0x15
– (reserved - Reply too long)
1)
22
0x16
non-permitted: Attributes, number of elements, PNU or IND
(23)
0x17
– (reserved - Write request: non-permitted format)
1)
24
0x18
Write request: Number of values not permitted
(...99)
0x64
– (reserved - PROFIBUS)
100
0x65
– (reserved - Festo: ReqID is not supported)
1)
(...255)
0xFF
– (reserved - Festo)
1)
These fault numbers are not used