Festo Электромотор MTR-DCI - Manual (Page 36)

1. System overview
1-14
Festo P.BE-MTR-DCI-CO-EN en 1209a
Warning
Check the measures which are necessary within the
framework of your EMERGENCY STOP circuit for switching
your machine/system into a safe state in the event of an
EMERGENCY STOP.
• If an EMERGENCY STOP circuit is necessary for your
application, use additional, separate safety limit
switches (e. g. as normally closed limit switches wired in
series).
– Cancelling the ENABLE signal at the controller inter-
face
– Switch off the load voltage.