RISCO Group ACUS - Manual (Page 112)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 84
Figure 80: Person List Commands
2. Select the appropriate option as per the following table.
Table 5: Person List Commands
Field Name Description
Edit
Click to edit the person details. The Edit Person dialog box
appears where you may make changes as per your
requirements. For details, refer to the section
5.5 Edit
Person .
Reinitialize Antipassback
Click to reset anti-pass-back feature for the person.
Note: The Anti-Pass-Back prevents a user from opening a
door unless the person is registered in the system as
present, in the zone corresponding to the side of the
door where he presents his card.
Change Zone
Figure 81: Change Person Zone
1. Click to change the zone in which the person is
currently available. The Change Person Zone
dialog box appears.
2. Select the new zone from the New Zone combo
box and click Save. The message appears,
“Person zone changed successfully”.
Enable AntiPassBack
Click Enable AntiPassBack to enable anti-pass-back
feature for the person. The Anti-Pass-Back prevents a
person from opening a door unless he/she is registered in
the system as present, in the zone corresponding to the side
of the door where the person presents his card
5.4 Add Person Details
The access is managed for persons in the building. Each person will be assigned a card which
will serve as identification for the person.