RISCO Group ACUS - Manual (Page 256)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 228
Figure 232: Edit Published Rule
3. Make changes wherever required and click Save. The message appears, “Rule
updated successfully”.
To edit the rules published to the current logged on section:
1. Click the Published To tab.
2. Select the check box against the rule which you want to edit.
3. Click Edit. The Add/Edit Published Rule dialog box appears.
4. Make changes wherever required and click Save. The message appears, “Rule
updated successfully”.
Note: You cannot edit the published rule from the section where it is published. The Published
To section tab is disabled. You cannot edit the section to which the rule is published.
8.7.3 Delete Published Rule
To delete the rule:
1. On the ACUS home page, click Settings
 Rules Published Rules. The Rules
Management dialog box appears.
2. Select the check box against the rule that you want to delete and click Delete. The
message appears.